Iintonga zeTungsten Carbide

Inkcazelo emfutshane:

Ubunzima: 85 ukuya kwi-95HRA

Uhlobo:Intonga eSolid,Iintonga eziGround ezineChamfer,Induku enemingxuma esembindini,iinduku ezinemingxuma emibini ethe tye,iinduku ezinemingxunya emibini yokupholisa yeHelical.

Ubungakanani obuziinkozo:I-Ultrafine, iSubmicron, ilungile, iPhakathi, iCoarse

Elinye igama: I-Carbide Rod, iHard Alloy Bar, iCarbide Round Bar

I-Carbide Rod Blank, iGround kunye ne-Unground Carbide Rod

Isitokhwe esikhulu esifumanekayo kuMgangatho oMgangatho kunye neeNgxoxo eziNgaphantsi komhlaba.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Inkcazo

Iintonga ze-tungsten carbide zisetyenziswa ngokubanzi kwizixhobo ezikumgangatho ophakamileyo we-carbide ezinje ngee-milling cutters, ii-end Mills, i-drills, i-reamers;isitampu, izixhobo zokulinganisa kunye neendawo ezahlukeneyo zokunxiba.

Ukucaciswa kweentonga zeTungsten Carbide

Iintlobo zeentonga zeCarbide:

I-Solid Finished Carbide Rod kunye neCarbide Rod Blank

Intonga yeCarbide enemingxuma yokuPholisa eNgqo

Iintonga zeCarbide ezinemingxuma emibini yokuPholisa ngokuthe ngqo

Iintonga zeCarbide ezinemingxuma emibini yokupholisa ye-Helical.

Imilinganiselo eyahlukeneyo iyafumaneka, iiNkonzo zokuLungisa ziYamkelekile

IBanga

ISO Grade	Ubungakanani bozinkozo (μm)	Co%	Ukuqina (HRA)	Ubuninzi (g/cm3)	I-TRS (N/mm2)	Amashishini ezicelo	Isicelo
K05-K10	0.4	6.0	94	14.8	3800	PCB Industry	Intsimbi engatyiwayo, intsimbi engeyoron, imathiriyeli edibeneyo kunye nabasiki bePCB
K10-K20	0.4	8.5	93.5	14.52	3800	PCB Industry	PCB Cutting Tools;Iplastiki kunye neMathiriyeli yoBulukhuni obuphezulu
K10-K20	0.2	9.0	93.8	14.5	4000	Ishishini lokungunda	Ubunzima obuphezulu Material
K20-K40	0.4	12.0	92.5	14.1	4200	3C kunye neshishini lokungunda	Ukusika intsimbi (HRC45-55) iAl Alloy kunye ne-Ti ingxubevange
K20-K40	0.5	10.3	92.3	14.3	4200		Insimbi engenastainless kunye nobushushu obunganyangekiyo, intsimbi yokuphosa
K20-K40	0.5	12.0	92	14.1	4200		Steel Stainless, Intsimbi yentsimbi kunye nokuqina okuphezulu kweMaterial
K20-K40	0.6	10.0	91.7	14.4	4000		Intsimbi yentsimbi kunye ne-Alloy ekwazi ukumelana nobushushu, intsimbi yentsimbi kunye nentsimbi ngokubanzi
K30-K40	0.6	13.5	90.5	14.08	4000	Isitampu esichanekileyo siyafa	Ukwenza Round Punch
K30-K40	1.0-2.0	12.5	89.5	14.1	3600		Ukwenza i-Flat Puch
K30-K40	1.5-3.0	14.0	88.5	14	3700		Ukwenza i-Flat Puch

Iimbonakalo

● I-100% ye-virgin tungsten carbide materials

● I-Unground kunye nomhlaba ziyafumaneka zombini

● Ubukhulu obahlukeneyo kunye namabakala;Iinkonzo zokwenza ngokwezifiso

● Ukumelana nokunxiba okugqwesileyo kunye nokuqina

● Amaxabiso akhuphisanayo

I-Cemented Carbide Rod yezixhobo zokusika

Iintonga zentsimbi zeTungsten ezigqityiweyo

Tungsten Carbide Round Bar

I-Cemented Carbide Micro Rod

Intonga yeCarbide yeTungsten engenanto

Carbide Rod Manufacturer

Inzuzo

● Ubungakanani benkozo ukusuka kwi-0.2μm-0.8μm, ubunzima 91HRA-95HRA.Ngokuhlolwa komgangatho ongqongqo kunye nokuqinisekisa umgangatho ongaguqukiyo ibhetshi nganye.
● Ezikhethekileyo kwi-carbide rod ngaphezu kweminyaka eyi-10, kunye nomgca wemveliso obalaseleyo weentonga ze-carbide eziqinileyo kunye nentonga enemingxuma yokupholisa.
● Njengomvelisi we-ISO, sisebenzisa izinto ezisemgangathweni ophezulu ukuqinisekisa umgangatho kunye nokusebenza kakuhle kweentonga zethu ze-carbide.
● Intonga yeCarbide yinto ekrwada yokwenza izixhobo zokusika.Izixhobo ezenziwe kuthi zinobomi obude kunye nokusebenza komatshini ozinzileyo.

Isicelo

I-Tungsten Carbide Rod ixhaphake kakhulu kwiinkalo ezininzi, ezinje ngePhepha, ukuPakisha, uShicilelo, kunye noShishino lweMetal olungeyontsimbi; oomatshini, imichiza, iPetroleum, iMetallurgy, iMold Industry.Kunye noShishino lweMoto kunye neziThuthuthu, iShishini loMbane, iShishini leCompressor, iAerospace Industry, iShishini lezoKhuselo.