I-tungsten ye-tungsten ye-tungsten brods okanye yd yelding ye-rods yezixhobo zokumba

Inkcazo emfutshane:

Iingoma: I-60-70% ye-Slicon Carbide Grits kunye ne-30-40% Ni / Cu

Ubude: 280/350 / 450mm

Ububanzi: 12/16 / 22mm

Ubunzima: 87-90hra

Ubunzima: 250-290G; I-450-480G

Ubungakanani bomnyama we-selicon ye-cartide: 1.6-3.22mm; 3.2-4.8mm; 4.4mm; i-6.4mm; i-8-9mm;

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Inkcazo

I-tungsten carbide ye-rods / yd yelding rodsIsetyenziselwa kakhulu ukugqobhoza i-Doun-uty kunye nokusika i-oyile yokusebenza kwi-oyile, imigodi, izixhobo zokulinganisa, ukuhambisa i-gesing, i-slings, i-slings, i-starws, i-slings

BethuI-rods ye-caride ye-carbideyamkela i-hammer ephezulu yokuqhekeza amasuntswana, engaquki ga ngokungcola, kwaye ukunqunyulwa kunye nokudinwa kungcono kakhulu kunelo lamasuntswana ahlukileyo, qinisekisa uzinzo lwemveliso.

Inkqubo yovavanyo olukhethekileyo lamasuntswana ophukileyo aqinisekisa ukuba amasuntswana aqhekekileyo aqaqanjelwa, hayi i-Flat.Hift

I-tungsten-carbide-carbide-rods-rods-okanye-yd-rods-rod-fors-2

Scrap Hammer

I-tungsten-carbide-carbide-rods-rods-okanye-yd-rods-to-Izixhobo-Izixhobo-1

Phula amasuntswana

I-Tungsten-carbide-carbide-rods-rods-okanye-yd-rods-rods-izixhobo-4

I-carbide yokudibanisa intonga

I-tungsten-carbide-ye-tungbide-rods-rods-ye-yd-yelding-rods-fod-Izixhobo-3

Izihlangu zokugaya

Amabakala amabini ayafumaneka, nokuba i-BBW yokunxiba izicelo okanye i-BBC yezicelo zokusika

Ubungakanani beenkozo	1.6-3.22mm	1/16 "- 1/8" BBW
	3.2.8mm	1/8 "- 3/16" BBW
	4.8-6.4mm	3/16 "- 1/4" BBC
	6.4-8.0mm	1/4 "- 5/16" BBC
	8.0-9.5mm	5/16 "- 3/8" BBC
	9.5-12.7mm	3/8 "-1/2" BBC

Olunye ubungakanani beSicelo

Kukhethwe ngokukhethekileyoI-tungsten carbide gritNokuba "i-block" enemiphetho ebukhali yokusika isicelo okanye "i-" ejikelezwe "i-tungsten ye-tungsten ye-tungsten ye-tungsten ye-tungsten yokunxiba iveliswa phantsi kolawulo lomgangatho ophantsi. Isixhobo sicocekile ngokucokisekileyo ukuqinisekisa ukuba ezona ndawo zilungileyo zinokwenzeka, zombini ngexesha lokwenza kunye nokusetyenziswa. IINKQUBO ZOKUGCINWA KWESICWANGCISO SOKUFAKWA KWESIQINISEKISO SOKUGQIBELA WOKUGQIBELA WOKUGQIBELA, I-DOD ephantsi yentonga. I-tungsside ye-tungsten ye-tungsten idityaniswe nobhedu, i-nickel kunye ne-zinc, ukuvelisa i-Premiund Communite ye-PROD.